搜尋套件、儲存庫與 APP 分類

GitHub 儲存庫reaper47/plant-sense

Plant Sense

一個使用 Android 應用程式測量植物土壤濕度的 Arduino 項目。

Plant Sense 專案封面
星標
13
分支
0
最近推送(UTC)
2026年10月24日
專案狀態
未封存

原始 README

以下為英文專案原文快照,最新內容請造訪 GitHub。

Plant Sense

Get it on F-Droid

An Arduino project with an Android app to measure the soil moisture of your plants.

Why? To know whether the plant is thirsty.

Features

  • Measures your plant's soil moisture, and ambient temperature/humidity.
  • Reports data to the Plant Sense app via Bluetooth.
  • The sensor saves energy by going into deep sleep between measurements.
  • A blue light on the device notifies the user when the latest measurements can be read.

Requirements

Hardware
Software

Installation

  1. Download the latest release and cd into it.
  2. Connect your soil moisture sensor to your computer and flash the firmware.
    On Linux: sudo esptool --chip esp32 --port "/dev/ttyUSB0" --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0x1000 ./bootloader_dio_40m.bin 0x8000 ./partitions.bin 0xe000 ./boot_app0.bin 0x10000 ./firmware.bin
  3. Disconnect the device from the computer.
  4. Slide the switch on the device to off, insert the 18650 lithium battery correctly, and slide the switch to on.
  5. Secure the device in soil.
  6. Install the Android app.

Usage

  1. Every five minutes, a bright, blue light will light up on the device to signal that data is ready to be read by the app.
  2. Tap the search icon in the lower right corner of the app to list the plants.
  3. Tap one of the plants in the list to see the readings.
  4. After 30s, the device will go back to deep sleep, and the blue light will dim.

Future Improvements

Name of the Plant

This firmware is intended to be used for one plant only because the name of the Bluetooth Device is Plant: Emerson, and the service and characteristic UUIDs are the same for everyone.

To change them, the user needs to:

  1. Clone the repository
  2. Open src/main.cpp
  3. Change the variables SERVICE_UUID, CHARACTERISTIC_UUID, and PLANT_NAME.
  4. Build the project with PlatformIO
  5. Flash the firmware

OR

Send an email to [me](mailto:macpoule@gmail.com) with your desired name, and I will take care of it.

Aural Signal

Add an aural signal, i.e. a beeper, to the device for it to beep when data is ready to be consulted in the app.

License

GNU General Public License v3.0

reaper47 GitHub avatar
GitHub 作者

reaper47 ↗

Working on Recipya!

Quebec, Canada
語言C++DartCHTMLMakefileSwiftKotlinObjective-C

依賴 Flutter 元件

App 分類

如何選擇適合專案的儲存庫?

先依使用情境篩選,再比較專案活躍情況,最後到原始儲存庫確認使用要求。

  1. 透過儲存庫名稱、作者或描述搜尋,再依技術分類縮小範圍。
  2. 綜合星標、分支與最近推送比較專案;星標反映社群關注,不保證品質。
  3. 使用前在 GitHub 確認 README、授權條款與 Issues。

來源與維護

“A repository is the most basic element of GitHub.”

GitHub Docs — About repositories ↗