serial_port_win32

serial_port_win32

A SerialPort library using win32 API.

Breaking Changes from 2.x.x to 3.x.x

Due to many major changes in win32 package, this package need to break some APIs.

Some main APIs change below:

• set Parity(int parity) -> set Parity(DCB_PARITY parity)
• static List<PortInfo> getPortsWithFullMessages({String classGUIDStr = GUID_DEVINTERFACE_COMPORT}) -> static List<PortInfo> getPortsWithFullMessages({GUID? classGUID})
• set StopBits(int stopBits) -> set StopBits(DCB_STOP_BITS stopBits)
• final LPWSTR _portNameUtf16; -> final PCWSTR _portNameUtf16;
• Some Exceptions change to WindowsExceptions

Deprecated

@Deprecated("Use win32 constant CLRDTR instead of this, because it is more clear to understand")
static const int CLRDTR = 6;

/// Clears the RTS (request-to-send) signal.
@Deprecated("Use win32 constant CLRRTS instead of this, because it is more clear to understand")
static const int CLRRTS = 4;

/// Sends the DTR (data-terminal-ready) signal.
@Deprecated("Use win32 constant SETDTR instead of this, because it is more clear to understand")
static const int SETDTR = 5;

/// Sends the RTS (request-to-send) signal.
@Deprecated("Use win32 constant SETRTS instead of this, because it is more clear to understand")
static const int SETRTS = 3;

Getting Started

Get Ports

final ports = SerialPort.getAvailablePorts();
print(ports);
/// result like [COM3, COM4]

Get Ports with more messages

final List<PortInfo> ports = SerialPort.getPortsWithFullMessages();
print(ports); 
/// print [Port Name: COM3, FriendlyName: 蓝牙链接上的标准串行 (COM3), hardwareID: BTHENUM\{00001101-0000-1000-8000-00803f9b55fb}_LOCALMFG&0000, manufactureName: Microsoft]
PortInfo({
required this.portName,
required this.friendlyName,
required this.hardwareID,
required this.manufactureName,
required this.deviceInstanceId,
});

Create Serial Port Instance

The port instance is Singleton Pattern. Don't re-create port for same Com name.

final port = SerialPort("COM5", openNow: true, ByteSize: 8, BaudRate: 9600);
// or
final port = SerialPort("COM5", openNow: false, ByteSize: 8, BaudRate: 9600);
port.open();
// or
port.openWithSettings(BaudRate: CBR_115200);
// final port = SerialPort("COM5"); /// auto open with default settings

Read

There are several methods to read bytes from serial port.

• readBytesUntil
  • [readBytesUntil] will read until an [expected] sequence is found
• readBytes
  • General Read with the timeout parameter.
• readFixedSizeBytes
  • [readFixedSizeBytes] will always read until readData.length == bytesSize.

print(await port.readBytesUntil(Uint8List.fromList("T".codeUnits))); /// '\0' is not included
/// or
var read = port.readBytes(18, timeout: Duration(milliseconds: 10))..then((onValue) => print(onValue));
var result = await read;
print(result);
/// or
var fixedBytesRead = port.readFixedSizeBytes(2)..then((onValue) => print(onValue));
await fixedBytesRead;
/// see more in small example

Write

Write String

String buffer = "hello";
await port.writeBytesFromString(buffer, includeZeroTerminator: false, stringConverter: StringConverter.nativeUtf8);

Write Uint8List

final uint8_data = Uint8List.fromList([1, 2, 3, 4, 5, 6]);
print(await port.writeBytesFromUint8List(uint8_data));

Get Port Connection Status

port.isOpened == false;

Flow Control

port.setFlowControlSignal(SETDTR);
port.setFlowControlSignal(CLRDTR);

Close Serial Port

Close Without Listen

port.close();

Close On Listen

port.closeOnListen(
  onListen: () => print(port.isOpened),
)
  ..onError((err) {
    print(err);
  })
  ..onDone(() {
    print("is closed");
    print(port.isOpened);
  });

Attention

• If you want to read or write strings using serial, be careful to handle the terminator at the end.

  • Although in most cases, like "Hello\0" (68 65 6C 6C 6F 00) and "Hello"(68 65 6C 6C 6F) both can be identified by computer.

• Do not use hot restart when port is opened.

Small Example

import 'package:serial_port_win32/src/serial_port.dart';

void main() {
    var ports = SerialPort.getAvailablePorts();
    print(ports);
    if(ports.isNotEmpty){
      var port = SerialPort(ports[0]);
      port.BaudRate = CBR_115200;
      port.StopBits = ONESTOPBIT;
      port.close();
    }
}

void _send() async {
  if (!port.isOpened) {
    port.open();
  }

  print('⬇---------------------------- general read (read <=  18 bytes)');
  await port.writeBytesFromString("😄我AT",
      includeZeroTerminator: false,
      stringConverter: StringConverter.nativeUtf8);
  var read = port.readBytes(18, timeout: Duration(milliseconds: 10))
    ..then((onValue) => print(onValue));
  await Future.delayed(Duration(milliseconds: 5));
  await port.writeBytesFromString("😄我AT",
      includeZeroTerminator: false,
      stringConverter: StringConverter.nativeUtf8);
  Uint8List readUint8List = await read;
  print('await result: $readUint8List');

  print(
          '⬇---------------------------- time out read,try to read **18 bytes** data in queue (read <= 18 bytes)');
  await port.writeBytesFromString("😄AT",
          includeZeroTerminator: false,
          stringConverter: StringConverter.nativeUtf8);
  var timeOutRead = port.readBytes(18, timeout: Duration(milliseconds: 10))
    ..then((onValue) => print(onValue));
  /// timeout
  await Future.delayed(Duration(milliseconds: 15));
  await port.writeBytesFromString("😄我AT",
          includeZeroTerminator: false,
          stringConverter: StringConverter.nativeUtf8);

  await timeOutRead;

  print('⬇---------------------------- read successful without timeout, but you just want 8 bytes (read <= 8 bytes)');
  await port.writeBytesFromString("😄AT",
      includeZeroTerminator: false,
      stringConverter: StringConverter.nativeUtf8);
  var wantedBytesRead = port.readBytes(8, timeout: Duration(milliseconds: 10))
    ..then((onValue) => print(onValue));
  await port.writeBytesFromString("😄我AT",
      includeZeroTerminator: false,
      stringConverter: StringConverter.nativeUtf8);

  await wantedBytesRead;

  print('⬇---------------------------- read until specified fixed size (2 bytes), it may cause deadlock (read == 2 bytes)');
  await port.writeBytesFromString("😄AT",
      includeZeroTerminator: false,
      stringConverter: StringConverter.nativeUtf8);
  var fixedBytesRead = port.readFixedSizeBytes(2)
    ..then((onValue) => print(onValue));
  await port.writeBytesFromString("😄我AT",
      includeZeroTerminator: false,
      stringConverter: StringConverter.nativeUtf8);

  await fixedBytesRead;

  port.close();
}

Tested Ciruit

The code is tested by a UART-USB Conveter. TX and RX are connected together for local loopback.