一個 Flutter 插件,使用 Firebase 的 Mobile Vision API 實現 QR 碼和條碼掃描。它為 Android 和 iOS 應用提供了一種簡單可靠的方式來整合掃描功能。該插件利用 Google 先進的電腦視覺技術,以高準確度檢測和解碼各種條碼格式。開發者可以輕鬆在支付系統、庫存管理或票務平台等應用中實現掃描功能。該套件輕量且文件完整,對初學者和有經驗的開發者都容易使用。
適用情境
庫存追蹤
支付處理
票務驗證
資產管理
使用者身分驗證
資料輸入自動化
主要特色
使用 Firebase Mobile Vision API
支援QR與多種條碼類型
跨平台(Android 與 iOS)
與 Flutter 的簡單整合
即時掃描
高精度解碼
適合對象
需要條形碼掃描的移動應用
使用 Firebase 的開發人員
初創公司快速建立原型
零售和物流應用
事件票務系統
使用建議
初始設定需要網路連接(Firebase)
相機UI的自訂選項有限
依賴 Firebase 依賴項
可能因 Firebase SDK 而產生大小開銷
設備需要相機權限
原始 README
以下為關聯原始碼儲存庫的 README 原文快照,最新內容請造訪原始碼儲存庫。
Flutter QR Bar Scanner
A Full Screen Scanner for Scanning QR code and Barcode using Google's Mobile Vision API
Reading & Scanning QR/Bar codes using Firebase's MLKit.
This plugin uses Android & iOS native APIs for reading images from the device's camera.
It then pipes these images both to the MLKit Vision Barcode API which detects qr/bar codes etc,
and outputs a preview image to be shown on a flutter texture.
The plugin includes a widget which performs all needed transformations on the camera
output to show within the defined area.
Android Models
With this new version of MLKit, there are two separate models you can use to do the barcode scanning. Currently, this
apk chooses to use the build-in model. This will increase your code size by ~2.2MB but will
result in better scanning and won't require a separate package to be downloaded in the background for barcode scanning
to work properly.
You could also use the Google Play Services and tell your app to download it on install from the play store. See the
instruction on the ml-kit barcode-scanning documentation page
for android. You would also have to remove the com.google.mlkit:barcode-scanning dependency;
configurations.all {
exclude group: "com.google.mlkit", module:"barcode-scanning"
}
// ...
dependencies {
// ...// Use this dependency to use the dynamically downloaded model in Google Play Services
implementation 'com.google.android.gms:play-services-mlkit-barcode-scanning:16.1.4'
}
Note that if you do this, you should tell your app to automatically download the model as in the above linked docs.MLKit
<application ...>
...
<meta-data
android:name="com.google.mlkit.vision.DEPENDENCIES"
android:value="barcode" />
<!-- To use multiple models: android:value="barcode,model2,model3" -->
</application>
If this doesn't work for you please open an issue.
64 Bit Only on iOS
The plugin is only supported for only 64 Bit on iOS as Google has only released MLKit as a 64 bit binary.
When you upgrade, if you are targeting a version of iOS before 11, you'll see a warning during the pod install
and your app probably won't build (at least for release). That's because it'll be trying to build the 32-bit version and
won't find the required files.
The easy way to solve this is by updating to build for iOS 11 and later. To do this:
Add this line to your Podfile:
platform :ios, '11.0'
(optional) Make sure your podfile sets build versions to 11 - if you see this at the bottom of your podfile make sure
the line setting the deployment target to 11 is in there.
post_install do |installer|
installer.pods_project.targets.each do |target|
target.build_configurations.each do |config|
config.build_settings['ENABLE_BITCODE'] = 'NO'
config.build_settings['IPHONEOS_DEPLOYMENT_TARGET'] = '11.0'
end
end
end
Setting the iOS Deployment Target to 11 in XCode -> Runner -> Build Settings -> Deployment -> iOS Deployment Target.
Building for 64-bit before 11.0.
If you absolutely need to build for devices before 11.0, you might need to use an old version of the library that supports
32-bit. If you're willing to live without 32 bit but do need to target before 11.0, you can do that by ignoring the warning
CocoaPods will give you, and setting XCode -> Runner -> Build Settings -> Architectures -> Architectures to ${ARCHS_STANDARD_64_BIT}.
Usage
See the example for how to use this plugin; it is the best resource available as it shows
the plugin in use. However, these are the steps you need to take to
use this plugin.
First, figure out the area that you want the camera preview to be shown in. This is important
as the preview needs to have a constrained size or it won't be able to build. This
is required due to the complex nature of the transforms needed to get the camera preview to
show correctly on both iOS and Android, while still working with the screen rotated etc.
It may be possible to get the camera preview to work without putting it in a SizedBox or Container,
but the recommended way is to put it in a SizedBox or Container.
You then need to include the package and instantiate the camera.
The QrCodeCallback can do anything you'd like, and wil keep receiving QR/Bar codes
until the camera is stopped.
There are also optional parameters to QRScannerCamera.
fit
Takes as parameter the flutter BoxFit.
Setting this to different values should get the preview image to fit in
different ways, but only BoxFit = cover has been tested extensively.
notStartedBuilder
A callback that must return a widget if defined.
This should build whatever you want to show up while the camera is loading (which can take
from milliseconds to seconds depending on the device).
child
Widget that is shown on top of the QRScannerCamera. If you give it a specific size it may cause
weird issues so try not to.
key
Standard flutter key argument. Can be used to get QRScannerCameraState with a GlobalKey.
offscreenBuilder
A callback that must return a widget if defined.
This should build whatever you want to show up when the camera view is 'offscreen'.
i.e. when the app is paused. May or may not show up in preview of app.
onError
Callback for if there's an error.
'formats'
A list of supported formats, all by default. If you use all, you shouldn't define any others.