Orientação gerada a partir de informações públicas. Apenas para referência.
O pacote Bluetooth para Flutter habilita funcionalidades de Bluetooth multiplataforma, permitindo que aplicativos descubram, se conectem e se comuniquem com dispositivos Bluetooth. Ele oferece uma API simples para escanear dispositivos próximos, estabelecer conexões e enviar/receber dados. Projetado para desenvolvedores que criam aplicações que interagem com periféricos Bluetooth, como sensores, wearables ou dispositivos IoT, ele suporta operações principais de Bluetooth tanto no Android quanto no iOS. O plugin é mantido pela comunidade Flutter e se integra perfeitamente a projetos Flutter por meio do pub.dev.
Casos de uso
Conectando a sensores habilitados para Bluetooth
Emparelhamento com dispositivos wearables
Transferindo dados entre dispositivos móveis e hardware Bluetooth
Construindo aplicativos de controle de IoT
Habilitar a comunicação entre dispositivos
Principais recursos
Descoberta de dispositivos e varredura
Gerenciamento de conexão Bluetooth
Transmissão e recepção de dados
Suporte multiplataforma (Android e iOS)
Design de API simples e intuitivo
Indicado para
desenvolvedores de aplicativos IoT
criadores de tecnologia vestível
especialistas em integração de hardware
Desenvolvedores de aplicativos móveis trabalhando com periféricos Bluetooth
Prototipagem de recursos habilitados para Bluetooth
Considerações
Requer permissões de Bluetooth no nível do dispositivo
Limitado a operações básicas de Bluetooth (sem recursos específicos do BLE)
O comportamento específico da plataforma pode variar
Sem tratamento interno de erros para todos os casos extremos
Depende da manutenção de biblioteca externa
README original
Snapshot do README original do repositório-fonte vinculado. Consulte o repositório para o conteúdo mais recente.
Introduction
Type-safe, minimalistic Buetooth plugin for Flutter,
a fork from orignal "FlutterBlue" plugin.
Cross-Platform Bluetooth LE
This plugin aims to offer the most from both platforms (iOS and Android).
Using the FlutterBlue instance, you can scan for and connect to nearby devices (BluetoothDevice).
Once connected to a device, the BluetoothDevice object can discover services (BluetoothService), characteristics (BluetoothCharacteristic), and descriptors (BluetoothDescriptor).
The BluetoothDevice object is then used to directly interact with characteristics and descriptors.
Usage
Obtain an instance
FlutterBlue flutterBlue = FlutterBlue.instance;
Scan for devices
/// Start scanningvar scanSubscription = flutterBlue.scan().listen((scanResult) {
// do something with scan result
});
/// Stop scanning
scanSubscription.cancel();
Connect to a device
/// Create a connection to the devicevar deviceConnection = flutterBlue.connect(device).listen((s) {
if(s == BluetoothDeviceState.connected) {
// device is connected, do something
}
});
/// Disconnect from device
deviceConnection.cancel();
Discover services
List<BluetoothService> services = await device.discoverServices();
services.forEach((service) {
// do something with service
});
Read and write characteristics
// Reads all characteristicsvar characteristics = service.characteristics;
for(BluetoothCharacteristic c in characteristics) {
List<int> value = await device.readCharacteristic(c);
print(value);
}
// Writes to a characteristicawait device.writeCharacteristic(c, [0x12, 0x34])
Read and write descriptors
// Reads all descriptorsvar descriptors = characteristic.descriptors;
for(BluetoothDescriptor d in descriptors) {
List<int> value = await device.readDescriptor(d);
print(value);
}
// Writes to a descriptorawait device.writeDescriptor(d, [0x12, 0x34])
Set notifications
await device.setNotifyValue(characteristic, true);
device.onValueChanged(characteristic).listen((value) {
// do something with new value
});
Reference
FlutterBlue API
Android
iOS
Description
scan
:white_check_mark:
:white_check_mark:
Starts a scan for Bluetooth Low Energy devices.
connect
:white_check_mark:
:white_check_mark:
Establishes a connection to the Bluetooth Device.
state
:white_check_mark:
:white_check_mark:
Gets the current state of the Bluetooth Adapter.
onStateChanged
:white_check_mark:
:white_check_mark:
Stream of state changes for the Bluetooth Adapter.
BluetoothDevice API
Android
iOS
Description
discoverServices
:white_check_mark:
:white_check_mark:
Discovers services offered by the remote device as well as their characteristics and descriptors.
services
:white_check_mark:
:white_check_mark:
Gets a list of services. Requires that discoverServices() has completed.
readCharacteristic
:white_check_mark:
:white_check_mark:
Retrieves the value of a specified characteristic.
readDescriptor
:white_check_mark:
:white_check_mark:
Retrieves the value of a specified descriptor.
writeCharacteristic
:white_check_mark:
:white_check_mark:
Writes the value of a characteristic.
writeDescriptor
:white_check_mark:
:white_check_mark:
Writes the value of a descriptor.
setNotifyValue
:white_check_mark:
:white_check_mark:
Sets notifications or indications on the specified characteristic.
onValueChanged
:white_check_mark:
:white_check_mark:
Notifies when the characteristic's value has changed.
state
:white_check_mark:
:white_check_mark:
Gets the current state of the Bluetooth Device.
onStateChanged
:white_check_mark:
:white_check_mark:
Notifies of state changes for the Bluetooth Device.
Troubleshooting
Scanning for service UUID's doesn't return any results
Make sure the device is advertising which service UUID's it supports. This is found in the advertisement
packet as UUID 16 bit complete list or UUID 128 bit complete list.