easy_debounce

easy_debounce

An extremely easy-to-use method call debouncer, throttler, rate limiter package for Dart/Flutter.

Debouncing

Debouncing is needed when there is a possibility of multiple calls to a method being made within a short duration of each other, and it's desireable that only the last of those calls actually invoke the target method.

So basically each call starts a timer, and if another call happens before the timer executes, the timer is reset and starts waiting for the desired duration again. When the timer finally does time out, the target method is invoked.

Throttling

Throttling is sort of the opposite of debouncing - only the first call to a method actually invokes the method, and any subsequent calls that are made within a specified duration are ignored. This can be useful to throttle presses on a refresh button for example.

Rate limiting

Rate limiting is similar to throttling - the first call to a method actually invokes the method, and any subsequent calls that are made within a specified duration are recorded and the once the duration has elapsed then the last call will be executed. This can be useful to rate limit progress updates as you want the first, last and periodic updates in between.

Usage

Debouncing

Use the debouncer by calling debounce:

EasyDebounce.debounce(
    'my-debouncer',                 // <-- An ID for this particular debouncer
    Duration(milliseconds: 500),    // <-- The debounce duration
    () => myMethod()                // <-- The target method
);

The above call will invoke myMethod() after 500 ms, unless another call to debounce() with the same tag is made within 500 ms. A tag identifies this particular debouncer, which means you can have multiple different debouncers running concurrently and independent of each other.

Cancelling a debouncer

A debouncer which hasn't yet executed its target function can be called by calling cancel() with the debouncers tag:

EasyDebounce.cancel('my-debouncer');

To cancel all active debouncers, call cancelAll():

EasyDebounce.cancelAll();

Counting active debouncers

You can get the number of active debouncers (debouncers which haven't yet executed their target methods) by calling count():

print('Active debouncers: ${EasyDebounce.count()}'); 

Fire a debouncer target function manually

If you need to fire the target function of a debouncer before the timer executes, you can call fire():

EasyDebounce.fire('my-debouncer');

This will execute the debouncers target function, but the debounce timer will keep running unless you also call cancel().

Throttling

Use the throttler by calling throttle:

EasyThrottle.throttle(
    'my-throttler',                 // <-- An ID for this particular throttler
    Duration(milliseconds: 500),    // <-- The throttle duration
    () => myMethod()                // <-- The target method
    onAfter: (){ ... }              // <-- Optional callback, called after the duration has passed 
);

The above call will invoke myMethod() once, and any subsequent calls to throttle() with the same tag within 500 ms are ignored. A tag identifies this particular throttler, which means you can have multiple different throttlers running concurrently and independent of each other.

The onAfter callback will be invoked after the throttler is done, i.e. when the specified duration has passed and the throttler is no longer ignoring calls.

Cancelling a throttler

A throttler which hasn't yet executed its target function can be called by calling cancel() with the throttlers tag:

EasyThrottle.cancel('my-throttler');

To cancel all active throttlers, call cancelAll():

EasyThrottle.cancelAll();

Counting active throttlers

You can get the number of active throttlers (throttlers which are still ignoring subsequent calls to their target methods) by calling count():

print('Active throttlers: ${EasyThrottle.count()}'); 

Rate Limiting

Use the rate limiter by calling rateLimit:

EasyRateLimit.rateLimit(
    'my-ratelimiter',               // <-- An ID for this particular rate limiter
    Duration(milliseconds: 500),    // <-- The rate limiter duration
    () => myMethod()                // <-- The target method
    onAfter: (){ ... }              // <-- Optional callback, called after the duration has passed 
);

The above call will invoke myMethod() once, and any subsequent calls to rateLimit() with the same tag within 500 ms are recorded, after 500 ms has elapsed the last call will be executed until no calls have been made within the subsequent 500 ms durations. A tag identifies this particular rate limiter, which means you can have multiple different rate limiters running concurrently and independent of each other.

The onAfter callback will be invoked on duration after the rate limiter has no calls to execute.

Cancelling a rate limiter

A rate limiter which is waiting for the duration to pass can be called by calling cancel() with the rate limiter tag:

EasyRateLimit.cancel('my-ratelimiter');

To cancel all active rate limiters, call cancelAll():

EasyRateLimit.cancelAll();

Counting active rate limiter

You can get the number of active rate limiters (rate limiters which are still ignoring subsequent calls to their target methods) by calling count():

print('Active rate limiters: ${EasyRateLimit.count()}');