Buscar pacotes, repositórios e categorias de apps

Detalhes do pacotev3.0.2

flutter_qr_bar_scanner

Um plugin Flutter para leitura/escaneamento de códigos QR e de barras usando a API Mobile Vision do Firebase

AndroidiOS
Downloads em 30 dias
259
Curtidas
57
Pontos Pub
110

Instalar pacote

flutter pub add flutter_qr_bar_scanner

Visão geral do pacote

Orientação gerada a partir de informações públicas. Apenas para referência.

Um plugin Flutter que permite a leitura de códigos QR e de barras usando a API do Mobile Vision do Firebase. Ele oferece uma maneira simples e confiável de integrar funcionalidades de escaneamento em aplicativos para Android e iOS. O plugin utiliza a tecnologia avançada de visão computacional do Google para detectar e decodificar diversos formatos de códigos de barras com alta precisão. Desenvolvedores podem facilmente implementar recursos de escaneamento em aplicações como sistemas de pagamento, gestão de estoque ou plataformas de ingressos. O pacote é leve e bem documentado, tornando-se acessível tanto para iniciantes quanto para desenvolvedores experientes.

Casos de uso

  • rastreamento de estoque
  • Processamento de pagamento
  • Validação de ingresso
  • Gestão de ativos
  • Autenticação de usuário
  • Automação de entrada de dados

Principais recursos

  • Usa a API do Firebase Mobile Vision
  • Suporta QR e vários tipos de código de barras
  • Multiplataforma (Android e iOS)
  • Integração simples com o Flutter
  • Varredura em tempo real
  • Decodificação de alta precisão

Indicado para

  • Aplicativos móveis que precisam de leitura de código de barras
  • Desenvolvedores usando o Firebase
  • Startups construindo MVPs rápidos
  • Aplicativos de varejo e logística
  • Sistemas de bilhetagem de eventos

Considerações

  • Requer internet para a configuração inicial (Firebase)
  • Personalização limitada da interface do câmera
  • Depende de dependências do Firebase
  • Pode ter sobrecarga de tamanho do SDK do Firebase
  • Permissões de câmera necessárias em dispositivos

README original

Snapshot do README original do repositório-fonte vinculado. Consulte o repositório para o conteúdo mais recente.

Flutter QR Bar Scanner

pub package

A Full Screen Scanner for Scanning QR code and Barcode using Google's Mobile Vision API

Reading & Scanning QR/Bar codes using Firebase's MLKit.

This plugin uses Android & iOS native APIs for reading images from the device's camera. It then pipes these images both to the MLKit Vision Barcode API which detects qr/bar codes etc, and outputs a preview image to be shown on a flutter texture.

The plugin includes a widget which performs all needed transformations on the camera output to show within the defined area.

Android Models

With this new version of MLKit, there are two separate models you can use to do the barcode scanning. Currently, this apk chooses to use the build-in model. This will increase your code size by ~2.2MB but will result in better scanning and won't require a separate package to be downloaded in the background for barcode scanning to work properly.

You could also use the Google Play Services and tell your app to download it on install from the play store. See the instruction on the ml-kit barcode-scanning documentation page for android. You would also have to remove the com.google.mlkit:barcode-scanning dependency;

configurations.all {
    exclude group: "com.google.mlkit", module:"barcode-scanning"
}
//  ...
dependencies {
  // ...
  // Use this dependency to use the dynamically downloaded model in Google Play Services
  implementation 'com.google.android.gms:play-services-mlkit-barcode-scanning:16.1.4'
}

Note that if you do this, you should tell your app to automatically download the model as in the above linked docs.MLKit

<application ...>
    ...
    <meta-data
        android:name="com.google.mlkit.vision.DEPENDENCIES"
        android:value="barcode" />
    <!-- To use multiple models: android:value="barcode,model2,model3" -->
</application>

If this doesn't work for you please open an issue.

64 Bit Only on iOS

The plugin is only supported for only 64 Bit on iOS as Google has only released MLKit as a 64 bit binary.

When you upgrade, if you are targeting a version of iOS before 11, you'll see a warning during the pod install and your app probably won't build (at least for release). That's because it'll be trying to build the 32-bit version and won't find the required files.

The easy way to solve this is by updating to build for iOS 11 and later. To do this:

  1. Add this line to your Podfile:
platform :ios, '11.0'
  1. (optional) Make sure your podfile sets build versions to 11 - if you see this at the bottom of your podfile make sure the line setting the deployment target to 11 is in there.
post_install do |installer|
    installer.pods_project.targets.each do |target|
        target.build_configurations.each do |config|
            config.build_settings['ENABLE_BITCODE'] = 'NO'
            config.build_settings['IPHONEOS_DEPLOYMENT_TARGET'] = '11.0'
        end
    end
end
  1. Setting the iOS Deployment Target to 11 in XCode -> Runner -> Build Settings -> Deployment -> iOS Deployment Target.

Building for 64-bit before 11.0.

If you absolutely need to build for devices before 11.0, you might need to use an old version of the library that supports 32-bit. If you're willing to live without 32 bit but do need to target before 11.0, you can do that by ignoring the warning CocoaPods will give you, and setting XCode -> Runner -> Build Settings -> Architectures -> Architectures to ${ARCHS_STANDARD_64_BIT}.

Usage

See the example for how to use this plugin; it is the best resource available as it shows the plugin in use. However, these are the steps you need to take to use this plugin.

First, figure out the area that you want the camera preview to be shown in. This is important as the preview needs to have a constrained size or it won't be able to build. This is required due to the complex nature of the transforms needed to get the camera preview to show correctly on both iOS and Android, while still working with the screen rotated etc.

It may be possible to get the camera preview to work without putting it in a SizedBox or Container, but the recommended way is to put it in a SizedBox or Container.

You then need to include the package and instantiate the camera.

import 'package:flutter/material.dart';
import 'package:flutter_qr_bar_scanner/qr_bar_scanner_camera.dart';

void main() {
  runApp(MyApp());
}

class MyApp extends StatelessWidget {
  @override
  Widget build(BuildContext context) {
    return MaterialApp(
      title: 'Flutter QR/Bar Code Reader',
      debugShowCheckedModeBanner: false,
      theme: ThemeData(
        primarySwatch: Colors.blue,
      ),
      home: MyHomePage(title: 'Flutter QR/Bar Code Reader'),
    );
  }
}

class MyHomePage extends StatefulWidget {
  MyHomePage({Key? key, this.title}) : super(key: key);
  final String? title;
  @override
  _MyHomePageState createState() => _MyHomePageState();
}

class _MyHomePageState extends State<MyHomePage> {
  String? _qrInfo = 'Scan a QR/Bar code';
  bool _camState = false;

  _qrCallback(String? code) {
    setState(() {
      _camState = false;
      _qrInfo = code;
    });
  }

  _scanCode() {
    setState(() {
      _camState = true;
    });
  }

  @override
  void initState() {
    super.initState();
    _scanCode();
  }

  @override
  void dispose() {
    super.dispose();
  }

  @override
  Widget build(BuildContext context) {
    return Scaffold(
      appBar: AppBar(
        title: Text(widget.title!),
      ),
      body: _camState
          ? Center(
              child: SizedBox(
                height: 1000,
                width: 500,
                child: QRBarScannerCamera(
                  onError: (context, error) => Text(
                    error.toString(),
                    style: TextStyle(color: Colors.red),
                  ),
                  qrCodeCallback: (code) {
                    _qrCallback(code);
                  },
                ),
              ),
            )
          : Center(
              child: Text(_qrInfo!),
            ),
    );
  }
}


The QrCodeCallback can do anything you'd like, and wil keep receiving QR/Bar codes until the camera is stopped.

There are also optional parameters to QRScannerCamera.

fit

Takes as parameter the flutter BoxFit. Setting this to different values should get the preview image to fit in different ways, but only BoxFit = cover has been tested extensively.

notStartedBuilder

A callback that must return a widget if defined. This should build whatever you want to show up while the camera is loading (which can take from milliseconds to seconds depending on the device).

child

Widget that is shown on top of the QRScannerCamera. If you give it a specific size it may cause weird issues so try not to.

key

Standard flutter key argument. Can be used to get QRScannerCameraState with a GlobalKey.

offscreenBuilder

A callback that must return a widget if defined. This should build whatever you want to show up when the camera view is 'offscreen'. i.e. when the app is paused. May or may not show up in preview of app.

onError

Callback for if there's an error.

'formats'

A list of supported formats, all by default. If you use all, you shouldn't define any others.

These are the supported types:

  ALL_FORMATS,
  AZTEC,
  CODE_128,
  CODE_39,
  CODE_93,
  CODABAR,
  DATA_MATRIX,
  EAN_13,
  EAN_8,
  ITF,
  PDF417,
  QR_CODE,
  UPC_A,
  UPC_E

Push and Pop

If you push a new widget on top of a the current page using the navigator, the camera doesn't necessarily know about it.

Contributions

Any kind of contribution will be appreciated.

License

MIT License

Inspire me

Be a Patreon

Categorias

Dependências

Lista de dependências 1 itens

Repositório-fonte

Projetos que usam este pacote

Ainda não há dados.