パッケージ、リポジトリ、アプリカテゴリを検索

motion のカバー
パッケージ詳細v2.0.3

motion

子要素にジャイロスコープまたはホバーに基づくモーション効果を適用するファッショナブルなウィジェット。

AndroidiOSWeb
30日間ダウンロード
869
いいね数
289
Pub ポイント
150

パッケージをインストール

flutter pub add motion

パッケージ概要

公開情報に基づく選定ガイドです。参考としてご利用ください。

モーションパッケージは、子ウィジェットに動的なジャイロスコープまたはホバーに基づくモーション効果を適用することで、ユーザー体験を向上させます。デバイスの動きやカーソル位置に応じて反応するインタラクティブで没入型のアニメーションを可能にし、モバイルおよびWebプラットフォームでの魅力的なUI作成に最適です。このパッケージは軽量であり、最小限のセットアップでFlutterプロジェクトにスムーズに統合できます。AndroidおよびiOSデバイス、およびWebブラウザをサポートしており、クロスプラットフォーム開発に非常に柔軟です。ボタン、カード、または背景に繊細な奥行きと応答性を追加するのに最適です。

用途

  • インタラクティブなアプリインターフェース
  • ジャイロスコープ対応のUI要素
  • Web向けのホバーに基づくアニメーション
  • カードまたはボタンのフィードバックを強化する
  • 没入型ランディングページの作成

主な機能

  • ジャイロスコープ駆動の運動
  • ホバーに基づくアニメーションサポート
  • クロスプラットフォーム互換性
  • 既存のウィジェットとの簡単な統合
  • 滑らかでパフォーマンスの高いアニメーション

適している対象

  • インタラクティブなUIを求める開発者
  • 動的な視覚フィードバックを求めるデザイナー
  • モバイルおよびウェブ向けのプロジェクト
  • モダンで魅力的なUXを実現するアプリ
  • 応答性のモーションエフェクトのプロトタイピング

注意事項

  • 低性能デバイスでのパフォーマンスに影響を与える可能性があります
  • ジャイロスコープモードにはデバイスのセンサーが必要です
  • Web サポートはブラウザの機能に依存します
  • 基本的なモーションパラメータ以外のカスタマイズは限定的です
  • 静的またはミニマリストデザインには適していません

元の README

関連するソースリポジトリの README 原文のスナップショットです。最新の内容はリポジトリをご覧ください。

Motion for Flutter widgets

pub package

This package adds a new Motion widget that applies a gyroscope-based effect to Flutter widgets. On desktop or when the gyroscope in not available, the effect is based on the pointer's hovering.

Check out the live demo !

"Demo of the Motion plugin"

To see examples of the following effect on a device or simulator:

cd example/
flutter run --release

How to use

First, add the dependency to your pubspec.yaml file:

dependencies:
  motion: ^<latest-version>

Then, initialize the Motion plugin at Dart runtime, before running your Flutter app :

Future<void> main() async {

  /// Initialize the plugin.
  await Motion.instance.initialize();

  /// Run your app.
  runApp(...);

}

Finally, wrap your target widget as child of a Motion widget. You may optionally provide a MotionController instance that will hold individual widget's transformations (useful for pointer based events). The simplest usage of this widget is the following :


import 'package:motion/motion.dart';

...

return Motion(child: myWidget);

Custom behavior

Elevation

To remain consistent with the Material design language, you can pass an elevation parameter to the widget by using the Motion.elevated constructor.

It will influence the offset, opacity and blurriness of the shadow. Possible values for elevation range between 0 and 100.

"Elevations examples"

Comparing different elevation values

Shadow

The shadow is optional and depends, when using the Motion.elevated constructor, on the elevation value. The higher the elevation, the blurrier and the lower from behind the widget the shadow will get. The amplitude of the shadow's movement also depends on the widget's elevation. This aims to achieve the same behavior as Material design language's notion of elevation.

"Shadow effect comparison"

Comparing with and without the shadow effect

By default, the shadow is enabled but you can disable it by constructing the Motion widget with shadow: null or by using the Motion.only constructor.

Glare

The glare effect is also optional. It is a very subtle gradient overlay that confers a reflective feel to the widget. This effect is not rendered on Safari iOS due to limitations on gradients performances.

"Glare effect comparison"

Comparing with and without the glare effect

Also enabled by default, you can disable this effect by constructing the Motion widget with glare: false or by using the Motion.only constructor.

Custom effects configurations

You can provide custom configurations for the glare, shadow and translation effects by passing GlareConfiguration, ShadowConfiguration and TranslationConfiguration to the Motion and Motion.only constructors. When omitted, the default values will be used, unless if you use the Motion.only constructor which only applies the tilt effect by default.

Damping

By default, the widget will naturally rotate back to its original position if the phone stops rotating. This intends to improve the user experience by preserving the widget's legibility as much as possible. This property is only applied to gyroscope events and is ignored in pointer events.

The damping property of your MotionController allows you to fine tune or disable this behavior. By providing a value between 0 and 1, you can change the speed at which the widget rotates back to its original position. Explicitly providing null disables this effect.

The default value is 0.2.

Update interval

By default, the sensor's update and pointer events intervals are set to 60 frames per second.

Higher values will result in more accurate motion data and thus smoother motion of the widgets, but will also have an increased impact on performances.

Ideally, the update interval should match Flutter's recommended 60 FPS (frames per seconds). However, a performance compromise may be required on certain older devices. In that case, you could use the standard 30 FPS or 24 FPS, the latter being the lowest frame rate required to make motion appear natural to the human eye.

The best practice for setting the sensor rate is to do it once, when initializing your app, like so :

void main() {

  /// Initialize the plugin.
  await Motion.instance.initialize();

  /// Globally set the sensors sampling rate to 60 frames per second.
  Motion.instance.setUpdateInterval(60.fps);

  /// Run your app.
  runApp(...);

}

Filter quality

The Motion widget implementation wraps the child with a matrix-based Transform widget. On most platforms, it is a good practice to have it set to FilterQuality.medium or FilterQuality.high. You may specify it directly from the widget's constructor :

  Motion(
    filterQuality: FilterQuality.high,
    child: ...
  )

However, please note that due to limitations on Safari iOS, it is always enforced to null in this specific browser.

Some developers have reported issues when using FilterQuality.high on the Web in certain Flutter 3 versions. You may need to check kIsWeb and use a different value, depending on the versions of Flutter you're using.

The default value is FilterQuality.high.

Permission

This implementation is optional. You may skip but Motion widgets will have no effect on any iOS 13+ Safari browser.

Starting from iOS 13, the Safari browser requires to call DeviceMotionEvent.requestPermission() to listen to devicemotion events. This permission must be requested upon user gesture, otherwise the Promise will automatically be rejected.

To detect if the permission is required, you can check the Motion.instance.isPermissionRequired property after calling Motion.instance.initialize().

If required, you can either call Motion.requestPermission() after presenting the user a rationale dialog or after pressing a button. An implementation can be found in the example app.

No other platform permission to access sensor data is implemented for now.

Contribution Guide

If you are having any problem with the Motion package, you can file an issue on the package repo's issue tracker.

Please make sure that your concern hasn't already been addressed in the "Closed" section. Although we try to take care of every issue in a timely manner, please always remember that open source maintainers owe you nothing.

Whether you're running into an error you think you could fix or if you want other features — if you're unhappy with the outcome of your proposal, please do not republish this package under a different name. Instead, you should depend on your own GitHub fork of the plugin without affecting every other developers who may not share your point of view.

Thank you for your understanding !

Credits

This package was developed with ♥ by @mrcendre.

Thanks to @sebstianbuechler and @ekasetiawans for their contributions !

カテゴリー

依存関係

依存関係一覧 3 件

  • motion_platform_interface^2.0.2
  • motion_web^2.0.2
  • vector_math^2.4.3

ソースリポジトリ

このパッケージを使用しているプロジェクト

データはまだありません。