💕 Love this library? Consider becoming a sponsor for
steveruizok
(the author of the original JavaScript library) or
adil192
(the maintainer of the Dart package).
This package exports a function named getStroke that will generate the points for a polygon based on an array of points.
To do this work, getStroke first creates a set of spline points (red) based on the input points (grey) and then creates outline points (blue). You can render the result any way you like, using whichever technology you prefer.
Installation
This package is available on pub.dev
and requires Flutter.
If you're using Dart without Flutter, check out versions 1.x.x of this package.
You may also provide options to getStroke.
You'll most likely store the StrokeOptions object in a variable,
but you can also pass it directly to getStroke.
You can customize the stroke by passing a StrokeOptions object as the second parameter to getStroke.
This object accepts the following properties:
Property
Type
Default
Description
size
double
16
The base size (diameter) of the stroke.
thinning
double
.5
The effect of pressure on the stroke's size.
smoothing
double
.5
How much to soften the stroke's edges.
streamline
double
.5
How much to remove variation from the input points.
simulatePressure
bool
true
Whether to simulate pressure based on distance between points, or else use the provided PointVectors' pressures.
isComplete
bool
true
Whether the stroke is complete.
start
StrokeEndOptions
How far to taper the start of the line.
end
StrokeEndOptions
How far to taper the end of the line.
start.cap
bool
true
Whether to cap the start of the line.
start.taperEnabled
bool
false
Whether to taper the start of the line.
start.customTaper
double
null
A custom taper value for the start of the line, defaults to the total running length.
Notes:
When the isComplete property is true, the line's end will be drawn at the last input point, rather than slightly behind it.
The StrokeEndOptions.cap property has no effect when StrokeEndOptions.taperEnabled is true.
To create a stroke with a constant width, set the thinning option to 0.
To create a stroke that gets thinner with pressure instead of thicker, use a negative number for the thinning option.
You can change the defaults by setting e.g. StrokeOptions.defaultThinning or StrokeEndOptions.defaultCap to a different value.
Rendering
While getStroke returns an array of points representing the outline of a stroke, it's up to you to decide how you will render these points.
See the StrokePainter class in the
example project
to see how you might draw these points in Flutter with a CustomPainter.
Advanced Usage
For advanced usage, the library also exports smaller functions that getStroke uses to generate its outline points.
getStrokePoints
A function that accepts an array of PointVectors and returns a set of StrokePoints. The path's total length will be the runningLength of the last point in the array. Like getStroke, this function also accepts any of the optional named parameters listed above.
A function that accepts an array of StrokePoints (i.e. the output of getStrokePoint) and returns an array of Points defining the outline of a stroke. Like getStroke, this function also accepts any of the optional named parameters listed above.
List<PointVector> myPoints = [
PointVector(0, 0),
PointVector(1, 2),
// etc...
];
final options = StrokeOptions(
size: 16,
);
final myStrokePoints = getStrokePoints(myPoints, options: options);
final myOutlinePoints = getStrokeOutlinePoints(myStrokePoints, options: options);
Note: Internally, the getStroke function passes the result of getStrokePoints to getStrokeOutlinePoints, just as shown in this example. This means that, in this example, the result of myOutlinePoints will be the same as if the myPoints List had been passed to getStroke.
rememberSimulatedPressure
Pressure simulation relies on the distance between points to determine the pressure at each point.
But in some scenarios, it would be wasteful to store all of these points.
The rememberSimulatedPressure argument solves this problem by calculating the pressure once
and then storing it in the original array of points.
/// Input points without pressure valuesList<PointVector> myPoints = [/* ... */];
getStroke(
myPoints,
options: StrokeOptions(
// isComplete and simulatePressure must be true for rememberSimulatedPressure
simulatePressure: true,
isComplete: true,
),
rememberSimulatedPressure: true,
);
// myPoints now have pressure values (except for duplicate points)print(myPoints[0].pressure); // (some number, not null)// We are now free to compress myPoints however we want, e.g.// this function removes duplicate points and points that are too close together:voidoptimisePoints({double thresholdMultiplier = 0.1}) {
if (points.length <= 3) return;
final minDistance = strokeOptions.size * thresholdMultiplier;
// Duplicate points have null pressure values, so we can remove them
myPoints.removeWhere((point) => point.pressure == null);
for (int i = 1; i < points.length - 1; i++) {
final point = points[i];
final prev = points[i - 1];
final next = points[i + 1];
if (prev.distanceSquaredTo(point) < minDistance * minDistance &&
next.distanceSquaredTo(point) < minDistance * minDistance) {
points.removeAt(i);
i--;
}
}
}
...but if you're using perfect-freehand in a commercial product,
consider becoming a sponsor for
steveruizok
(the author of the original JavaScript library) or
adil192
(the maintainer of the Dart package).. 💰