搜索插件、代码仓与 APP 分类

插件详情v0.5.2

usb_serial

该插件将使您能够轻松使用基于 FTDI 或 CDC(以及更多!)协议的 USB 串行硬件。

Android
近 30 天下载
1.9万
喜欢数
194
Pub 分数
150

安装插件

flutter pub add usb_serial

插件介绍

基于插件公开信息、社区数据与项目使用情况整理的选型参考。

usb_serial 包使 Flutter 应用程序能够使用 FTDI、CDC 和其他协议在 Android 上与 USB UART 设备通信。它提供了一个简单的接口,用于读取和写入 USB 串行端口,非常适合连接传感器、微控制器和工业设备等硬件外设。该插件利用原生 Android USB API,专为需要通过 USB 进行直接硬件交互的开发者设计。

适合场景

  • 连接到USB转串口适配器
  • 从微控制器读取数据
  • 控制工业硬件
  • 与物联网设备集成
  • 开发自定义硬件接口

主要特点

  • 支持 FTDI 和 CDC 协议
  • 简单的读写 API
  • 仅限 Android 的平台支持
  • 原生USB通信
  • 开源实现

适合对象

  • 物联网应用开发者
  • 硬件集成商
  • 嵌入式系统工程师
  • 使用 USB 的 Android 应用开发人员
  • 使用USB连接设备进行原型设计

使用建议

  • 仅限 Android 平台
  • 需要 USB OTG 支持
  • 需要正确的设备权限
  • 可能需要额外的硬件驱动程序
  • 与 iOS 不兼容

原始 README

以下为关联源码仓库的 README 原文快照,最新内容请访问源码仓库。

Looking for maintainer

I'm looking for a new maintainer for this project, please indicate your interest here: https://github.com/altera2015/usbserial/issues/121

Pub Flutter

usb_serial

An Android USB Serial Flutter Plugin

This plugin allows Flutter code to interact with USB serial devices connected to your Android device. For example an FTDI or CDC based USB device.

Getting Started

Add a dependency to your pubspec.yaml

dependencies:
	usb_serial: ^0.5.0

include the usbserial package at the top of your dart file.

import 'package:usb_serial/usb_serial.dart'
Optional

Add

	<intent-filter>
		<action android:name="android.hardware.usb.action.USB_DEVICE_ATTACHED" />
	</intent-filter>

	<meta-data android:name="android.hardware.usb.action.USB_DEVICE_ATTACHED"
		android:resource="@xml/device_filter" />

to your AndroidManifest.xml

and place device_filter.xml

<?xml version="1.0" encoding="utf-8"?>
<resources>
    <!-- 0x0403 / 0x6001: FTDI FT232R UART -->
    <usb-device vendor-id="1027" product-id="24577" />

    <!-- 0x0403 / 0x6015: FTDI FT231X -->
    <usb-device vendor-id="1027" product-id="24597" />

    <!-- 0x2341 / Arduino -->
    <usb-device vendor-id="9025" />

    <!-- 0x16C0 / 0x0483: Teensyduino  -->
    <usb-device vendor-id="5824" product-id="1155" />

    <!-- 0x10C4 / 0xEA60: CP210x UART Bridge -->
    <usb-device vendor-id="4292" product-id="60000" />

    <!-- 0x067B / 0x2303: Prolific PL2303 -->
    <usb-device vendor-id="1659" product-id="8963" />

    <!-- 0x1366 / 0x0105: Segger JLink -->
    <usb-device vendor-id="4966" product-id="261" />

    <!-- 0x1366 / 0x0105: CH340 JLink -->
    <usb-device vendor-id="1A86" product-id="7523" />

</resources>

in the res/xml directory. This will notify your app when one of the specified devices is plugged in.

Usage of Asynchronous API

...
onPressed: () async {
	List<UsbDevice> devices = await UsbSerial.listDevices();
	print(devices);

	UsbPort port;
	if (devices.length == 0) {
		return;
	}
	port = await devices[0].create();

	bool openResult = await port.open();
	if ( !openResult ) {
		print("Failed to open");
		return;
	}

	await port.setDTR(true);
	await port.setRTS(true);

	port.setPortParameters(115200, UsbPort.DATABITS_8,
	  UsbPort.STOPBITS_1, UsbPort.PARITY_NONE);

	// print first result and close port.
	port.inputStream.listen((Uint8List event) {
		print(event);
		port.close();
	});

	await port.write(Uint8List.fromList([0x10, 0x00]));
}
...

Usage of transaction API

This API is a layer on top of the asynchronous part of the library. It provides two Stream Transformers and a Transaction helper based on the StreamQueue class.

  1. Terminated Transformer, this splits incoming data based on a configurable end of message bytes "terminator".
  2. Magic Header + Length byte, this splits incoming data based on a configurable header ( with wildcards! ) and a length byte directly following the header.

In case neither is a fit, you can use one of those Transformers to create you own that is specific to the binary format you are dealing with.


    ...
    Transaction<String> transaction = Transaction.stringTerminated(port.inputStream, Uint8List.fromList([13,10]));
    ...

    // While using transactions you can still listen to all
    // incoming messages!
    transaction.stream.listen( (String data) {
      print(data);
    });

    // you can write asynchronous messages as before!
    p.write(Uint8List.fromList([65,66,13,10]));

    // BUT you can also write 'transactions'. This is a combination of a flush, write and wait for response
    // with a timeout. If no response is received within the timeout a null value is returned.
    // this sends "AB\r\n"
    var response = await transaction.transaction(p, Uint8List.fromList([65,66,13,10]), Duration(seconds: 1) );
    print("The response was $response");

Upgrading from pre-0.3.0

In version 0.3.0 a resource bug was fixed (issue #35) which required signature changes.

Transformer Class changes

The Transformer classes previously inherited directly from StreamTransformer, this class however has no dispose method. So a new abstract class was added to include dispose and called by Transaction.dispose().

abstract class DisposableStreamTransformer<T, R> implements StreamTransformer<T, R> {
  void dispose();
}

Steps:

  • Change parent class to DisposableStreamTransformer
  • Implement dispose class, and make sure to dispose of your StreamController
Transaction Class changes

The Transaction class previously did not have access to the transformer, only the stream. The signature of Transaction constructor changed from

Transaction<T>(Stream<T>);

to

Transaction(Stream<Uint8List> stream, DisposableStreamTransformer<Uint8List, T> transformer);

If you are using the static factory methods you should not have to make any changes to your code. Only if you created your own Transformer/Transactions.

FAQ

Always ask permission to use USB port

https://github.com/altera2015/usbserial/issues/49 https://github.com/altera2015/usbserial/issues/38

Dependencies

This library depends on:

https://github.com/felHR85/UsbSerial

所属分类

依赖

依赖清单 2 项

源码仓库

使用此插件的项目